How to Reset a Kenmore Refrigerator?

Kenmore refrigerator is a product from an American appliance company. It is well known for its innovative ideas, better life span, facilities, and customer service features. The Kenmore refrigerator comes in different variants: a double door, a single door, a side-by-side, and a French door. The precise design and the accurate engineering make the life span of these refrigerators last longer.

However, sometimes some technicalities may occur in the refrigerator as it is an electrical appliance. Therefore, when these missed functions or technicalities occur, it becomes quite necessary to repair these products, or if these issues are small, resetting the product might be helpful.

It is necessary to know the model of the refrigerator owned by an individual and the setting or function required to be reset. The following article will explain several technicalities, steps, and guidance to reset the Kenmore refrigerator.

Read Also: Fixing a Kenmore Refrigerator’s Cooling Problem

Reasons for Resetting Kenmore Refrigerator:

Kenmore refrigerator is nothing but an electrical appliance that is made up of connections, wirings, etc. Therefore, some technicalities might occur in the product, which might cause the dysfunction of several features of the Kenmore refrigerator.

Some of the general reasons that might occur to reset Kenmore refrigerators are:

  • Sometimes, an issue might occur after a power outage.
  • If the refrigerant is not properly cooling.
  • Improper cooling in the freezer section.
  • Improper functioning of the refrigerator after the cleaning of air filters or water filters.
  • An error code is displayed on the control panel for Kenmore Elite refrigerators.

These are some of the general reasons why an individual might want to reset their Kenmore refrigerator. However, if the refrigerator starts working properly after resetting the functions, there will be no hassle. Otherwise, calling a technician might be necessary for a big default or complex technical issues.

Kenmore Refrigerator features

Quick Way to Reset a Kenmore Refrigerator:

In some general cases where improper cooling or dysfunction occurs in the Kenmore refrigerator, it becomes quite necessary to reset the overall refrigerator.

However, before we set in the refrigerator, it is necessary to have full information about the refrigerator’s model and a thorough knowledge of the functions available on the control panel.

Therefore, the step-by-step guide to resetting the Kenmore refrigerator is given below.

  • Initially, it is necessary to unlock the refrigerator doors.
  • Look out for the “Ultra Ice” button and the “Home button” on the refrigerator’s control panel.
  • Press both of the buttons simultaneously for a duration of approximately 5 seconds.
  • After 5 seconds, the refrigerator will be turned off, i.e., the control panel will go blank, and the lighting within the fridge will turn off.
  • Once the refrigerator is off, it is advised to unplug it from the power outlet.

Now, connect the refrigerator back to the power source. However, it is advised to wait for a minute or 30 seconds before connecting it back to the power source for better functioning and resetting the refrigerator.

Once the refrigerator is connected to the power source, it will start working in the default condition, i.e., resetting the Kenmore refrigerator.

If the refrigerator does not work properly even after resetting it, it is advised to call customer service and demand a technician check.

Resetting the temperature of the Kenmore refrigerator:

The Kenmore refrigerator comes to the future of changing the temperature individually for either the refrigerator or freezer sections. These features are quite useful for individuals, but sometimes, our dysfunction in cooling occurs when this occurs.

Resetting the refrigerator’s temperature to function at its default settings is necessary.

The steps to reset the temperature on the Kenmore refrigerator are as follows:

  • In the case of a Kenmore Elite refrigerator or other refrigerator with a different temperature button for the freezer and fridge section, press and hold these two buttons simultaneously.
  • Once you hear a beep, it clearly indicates that the temperature has been reset.
  • It is advised to change the temperature options by pressing the temperature button of either the freezer section or the fridge section.
  • However, it is advised that there must be a 24-hour gap between changing the temperature option of the freezer and the fridge section.

Once the temperature has been reset, it is advised to check for the functioning of the refrigerator. If the temperature options are working fine, there is no need to take further action. Otherwise, help from the customer service is necessary.

temperature kenmore

Resetting the Kenmore refrigerator’s water filter:

Sometimes, a technicality might occur in the water filter section of the Kenmore refrigerator. In such cases, an individual can easily reset the water filter function on the refrigerator so as to initiate the proper functioning of the filter.

The guidelines to go through the resetting of the Kenmore refrigerator water filter are given below:

  • Locate the automatic light button and the refrigerator’s lock button.
  • Press both of these buttons simultaneously for a time span of at least 4 seconds.
  • While pressing the button, the filter status on the control panel will start flashing.
  • Once the indicator starts flashing, it is advised to release the buttons.
  • The control panel will have a water filter reset button. It should be pressed for a duration of at least 3 to 5 seconds to initiate
  • the resetting of the water filter.
  • Again, simultaneously press the lock and the automatic light button timer until the indicator is flashing.
  • Press and hold the filter button for 5 to 10 seconds to initiate the complete water filter reset.

After resetting the water filter, this function might work as properly as before. Otherwise, if the water filter still shows dysfunction, it is advised to call customer care and call for a technician check-up.

Resetting the Kenmore refrigerator in the case of power failure:

Generally, the Kenmore refrigerator experiences some technicalities during power failures. In such a condition, it is quite necessary to reset the refrigerator because if the refrigerator is not reset to the default setting after a power failure, there must be chances of greater technicalities and complex issues.

The simple guidelines to reset the Kenmore refrigerator in the case of a power failure are as follows:

  • Most Kenmore refrigerators are provided with a circuit breaker in their service panel. Therefore, it is necessary to locate that circuit breaker.
  • Some refrigerator models provide the ability to turn it off. Therefore, in such a condition, please turn it off. Otherwise, the socket can also be plugged out from the power source.
  • It is advised to wait for at least 10 seconds before plugging it back into the power socket.
  • Once you plug it back, the refrigerator will be reset to its default settings.

A general check must be made over the refrigerator to see whether it is working as before or not. In a condition where there is some dysfunction is spotted, a technician must be called immediately.


Kenmore Refrigerator is a well-reputed company known for its long refrigerator life, better customer service, innovative functions and features, etc. However, sometimes technical issues or dysfunction might occur in the refrigerator.

In such conditions, the initial thing that an individual must do is reset the Kenmore refrigerator to its default settings. However, before resetting the refrigerator, the refrigerator’s model must be made sure of which refrigerator function needs reset.

In the case of complex issues or the refrigerator is still not functioning properly after resetting it, it is highly advisable to call a technician in customer service so as to get a thorough check of the refrigerator.

My Take on This Topic

As a refrigerator repair technician, I have found that resetting the refrigerator is one of the easiest first steps for troubleshooting common issues. While it often resolves minor glitches, resetting alone cannot fix major component failures or mechanical problems. Many factors, like the appliance’s age, usage patterns, power fluctuations, installation faults, and lack of maintenance, contribute to issues.

In my experience, Kenmore refrigerators are quite reliable, but regular maintenance like condenser cleaning, gasket checks, compressor inspections, and selecting proper temperature settings based on ambient conditions and usage go a long way in preventing problems. Resetting works best when done along with proper usage and care for optimal performance. I recommend consumers learn the basics of refrigerator care and utilize authorized service agents for repairs to get the most out of their Kenmore appliances. Simple maintenance combined with resets, when needed, can significantly extend the life span of any refrigerator.

About: Peter

He is an avid blogger with a deep passion for refrigerators. His well-researched and engaging blog posts offer informative guides on all things related to refrigerators. When he's not writing, he sketches cartoons.

Leave a Comment